Description
FEATURES
- Five (5) Sets of Punches & Dies
- Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
- Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
- Magnetic Base Work Light
- Adjustable Electric Back Gauge (36″)
- Scrap Boxes at Punching & Notching Stations
- Adjustable Stroke Depth at Punch
- Two (2) Full-Control Foot Pedals
- Two (2) Hold Die Holders
- Two (2) Piece Gauging Table at Punch Station
- Keyed Punch Holder for Shaped Tooling
SPECIFICATIONS
| Model | MSIW192DX | |
| Work Stations | 5 | |
| Punching | Punching Pressure | 192 Tons |
| Standard Tooling | 1-1/2″ x 1-1/2″ | |
| Large Tooling | 2″ x 1-3/16″ | |
| Oversize Tooling | 4-5/15″ x 1/2″ | |
| Throat Depth | 24″ | |
| Stroke Depth | 3-1/8″ | |
| Cycle/Min. (3/4″) | 22 | |
| Work Height | 44-1/2″ | |
| Flat Bear Shearing | Capacity | 16″ x 1″ |
| Width and Thickness | 24″ x 3/4″ | |
| Blade Length | 24″ | |
| Angle Flange Trim | 5″ x 5/8″ | |
| Work Height | 37″ | |
| Angle Shear | 90 Degrees | 8″ x 8″ x 3.4″ |
| 45 Degrees | 3″ x 3″ x 3/8″ | |
| Work Height | 44-1/2″ | |
| Bar Shearing | Round Bar | 2-1/4″ |
| Square Bar | 2″ x 2″ | |
| Channel Shear | 10″ | |
| H Beams | 10″ | |
| T Beams | 6″ x 9/16″ | |
| Work Height | 44-1/2″ | |
| Notching | Rectangular Notcher | 2-3/8″ x 4″ x 5/8″ |
| Large V | 4″ x 4″ x 5/8″ | |
| Work Height | 36-1/2″ | |
| Special Tooling | Single V Bending Attachment | 10″ with 3″ wide V |
| Multi V Bending Attachment | 27-1/2″ with 1/2″, 3/4″, 1″, 1-1/4″ wide V | |
